Will the AVR-S770H damage the B6.2?

No. The AVR-S770H is rated for the B6.2's 6 Ω load as it comes.

What impedance setting should I use for the B6.2 on the AVR-S770H?

None: the B6.2 is 6 Ω, and the AVR-S770H needs no change for it.

Is the AVR-S770H powerful enough for the B6.2?

Comfortable. From a seat 2 m away, loud 95 dB movie peaks take about 26 W per speaker, and the AVR-S770H is rated 75 W per channel. Cinema reference level, 105 dB peaks, takes about 253 W.

Does the ELAC B6.2 work with the Denon AVR-S770H?

Verdict

Yes

The B6.2 is 6 Ω, and the AVR-S770H is rated for speakers down to 4 Ω, so it drives them as is.

Speaker load

6 Ω speaker, rated down to 4 Ω

Power

75 W

Comfortable. About 26 W gives 95 dB peaks at 2 m

How to connect them

Connect the B6.2 speakers to the AVR-S770H's front terminals with speaker wire.
In the AVR-S770H's speaker setup, set speaker impedance to 6 Ω.
Run Audyssey MultEQ with its microphone at your seat.

Plan the B6.2 and AVR-S770H in your own room.

Draw your room in 3D, place both, and see every connection checked and how loud they play at your seat. Designing is free.

Build it in your room

The specs that decide it

ELAC B6.2

Impedance: 6 Ω
Sensitivity: 87 dB (2.83 V, 1 m)
MSRP: $479 a pair (MSRP, September 2026)

All B6.2 specs and pairings

Denon AVR-S770H

Amplifier channels: 7
Height formats: Dolby Atmos, DTS:X
Lowest speaker impedance: 4 Ω
MSRP: $749 each (MSRP, September 2026)

All AVR-S770H specs and pairings

Questions about the B6.2 and AVR-S770H

Does the B6.2 work with the AVR-S770H?: Yes. The B6.2 is 6 Ω, and the AVR-S770H is rated for speakers down to 4 Ω, so it drives them as is.
Will the AVR-S770H damage the B6.2?: No. The AVR-S770H is rated for the B6.2's 6 Ω load as it comes.
What impedance setting should I use for the B6.2 on the AVR-S770H?: None: the B6.2 is 6 Ω, and the AVR-S770H needs no change for it.
Is the AVR-S770H powerful enough for the B6.2?: Comfortable. From a seat 2 m away, loud 95 dB movie peaks take about 26 W per speaker, and the AVR-S770H is rated 75 W per channel. Cinema reference level, 105 dB peaks, takes about 253 W.

Swap one of them

ELAC B6.2 + Onkyo TX-NR6100Works
ELAC B6.2 + Yamaha RX-V6AWorks
Klipsch RP-500M II + Denon AVR-S770HWorks
ELAC A4.2 + Denon AVR-S770HWorks

References

Specs verified against the manufacturer's published data. Last checked September 15, 2026.

Brand names are trademarks of their owners. Not affiliated with or endorsed by any manufacturer. 3D models are our approximations. Prices are manufacturer list prices (MSRP) as of the month shown. How we earn from buy links: affiliate disclosure.