Will the RX-V6A damage the Stage 245C?

No. The RX-V6A is rated for the Stage 245C's 6 Ω load as it comes.

What impedance setting should I use for the Stage 245C on the RX-V6A?

None: the Stage 245C is 6 Ω, and the RX-V6A needs no change for it.

Is the RX-V6A powerful enough for the Stage 245C?

More than you need. From a seat 2 m away, loud 95 dB movie peaks take about 11 W per speaker, and the RX-V6A is rated 100 W per channel. Cinema reference level, 105 dB peaks, takes about 101 W.

Does the JBL Stage 245C work with the Yamaha RX-V6A?

Verdict

Yes

The Stage 245C is 6 Ω, and the RX-V6A is rated for speakers down to 4 Ω, so it drives them as is.

Speaker load

6 Ω speaker, rated down to 4 Ω

Power

100 W

More than you need. About 11 W gives 95 dB peaks at 2 m

How to connect them

Connect the Stage 245C speakers to the RX-V6A's front terminals with speaker wire.
In the RX-V6A's speaker setup, set speaker impedance to 6 Ω.
Run YPAO with its microphone at your seat.

Plan the Stage 245C and RX-V6A in your own room.

Draw your room in 3D, place both, and see every connection checked and how loud they play at your seat. Designing is free.

Build it in your room

The specs that decide it

JBL Stage 245C

Impedance: 6 Ω
Sensitivity: 91 dB (2.83 V, 1 m)
Recommended amplifier power: 20–150 W
MSRP: $440 each (MSRP, September 2026)

All Stage 245C specs and pairings

Yamaha RX-V6A

Amplifier channels: 7
Height formats: Dolby Atmos, DTS:X
Lowest speaker impedance: 4 Ω
MSRP: $800 each (MSRP, October 2025)

All RX-V6A specs and pairings

Questions about the Stage 245C and RX-V6A

Does the Stage 245C work with the RX-V6A?: Yes. The Stage 245C is 6 Ω, and the RX-V6A is rated for speakers down to 4 Ω, so it drives them as is.
Will the RX-V6A damage the Stage 245C?: No. The RX-V6A is rated for the Stage 245C's 6 Ω load as it comes.
What impedance setting should I use for the Stage 245C on the RX-V6A?: None: the Stage 245C is 6 Ω, and the RX-V6A needs no change for it.
Is the RX-V6A powerful enough for the Stage 245C?: More than you need. From a seat 2 m away, loud 95 dB movie peaks take about 11 W per speaker, and the RX-V6A is rated 100 W per channel. Cinema reference level, 105 dB peaks, takes about 101 W.

Swap one of them

References

Specs verified against the manufacturer's published data. Last checked September 15, 2026.

Brand names are trademarks of their owners. Not affiliated with or endorsed by any manufacturer. 3D models are our approximations. Prices are manufacturer list prices (MSRP) as of the month shown. How we earn from buy links: affiliate disclosure.