Will the TX-NR7100 damage the Stage 260F?

No. The TX-NR7100 is rated for the Stage 260F's 6 Ω load as it comes.

What impedance setting should I use for the Stage 260F on the TX-NR7100?

None: the Stage 260F is 6 Ω, and the TX-NR7100 needs no change for it.

Is the TX-NR7100 powerful enough for the Stage 260F?

More than you need. From a seat 2 m away, loud 95 dB movie peaks take about 13 W per speaker, and the TX-NR7100 is rated 100 W per channel. Cinema reference level, 105 dB peaks, takes about 127 W.

Does the JBL Stage 260F work with the Onkyo TX-NR7100?

Verdict

Yes

The Stage 260F is 6 Ω, and the TX-NR7100 is rated for speakers down to 4 Ω, so it drives them as is.

Speaker load

6 Ω speaker, rated down to 4 Ω

Power

100 W

More than you need. About 13 W gives 95 dB peaks at 2 m

How to connect them

Connect the Stage 260F speakers to the TX-NR7100's front terminals with speaker wire.
Run Dirac Live with its microphone at your seat.

Plan the Stage 260F and TX-NR7100 in your own room.

Draw your room in 3D, place both, and see every connection checked and how loud they play at your seat. Designing is free.

Build it in your room

The specs that decide it

JBL Stage 260F

Impedance: 6 Ω
Sensitivity: 90 dB (2.83 V, 1 m)
Recommended amplifier power: 20–225 W
MSRP: $550 each (MSRP, September 2026)

All Stage 260F specs and pairings

Onkyo TX-NR7100

Amplifier channels: 9
Height formats: Dolby Atmos, DTS:X
Lowest speaker impedance: 4 Ω
MSRP: $1,300 each (MSRP, August 2024)

All TX-NR7100 specs and pairings

Questions about the Stage 260F and TX-NR7100

Does the Stage 260F work with the TX-NR7100?: Yes. The Stage 260F is 6 Ω, and the TX-NR7100 is rated for speakers down to 4 Ω, so it drives them as is.
Will the TX-NR7100 damage the Stage 260F?: No. The TX-NR7100 is rated for the Stage 260F's 6 Ω load as it comes.
What impedance setting should I use for the Stage 260F on the TX-NR7100?: None: the Stage 260F is 6 Ω, and the TX-NR7100 needs no change for it.
Is the TX-NR7100 powerful enough for the Stage 260F?: More than you need. From a seat 2 m away, loud 95 dB movie peaks take about 13 W per speaker, and the TX-NR7100 is rated 100 W per channel. Cinema reference level, 105 dB peaks, takes about 127 W.

Swap one of them

JBL Stage 260F + Marantz Cinema 70sWorks
JBL Stage 260F + Denon AVR-X2900HWorks
ELAC DF63 + Onkyo TX-NR7100Works
JBL Stage 280F + Onkyo TX-NR7100Works

References

Specs verified against the manufacturer's published data. Last checked September 15, 2026.

Brand names are trademarks of their owners. Not affiliated with or endorsed by any manufacturer. 3D models are our approximations. Prices are manufacturer list prices (MSRP) as of the month shown. How we earn from buy links: affiliate disclosure.