Start

Klipsch RP-600M II

Reference Premiere series

The Klipsch RP-600M II is a bookshelf speaker with 8 Ω impedance and 94.5 dB sensitivity. Every receiver and amp in our catalogue can drive it.

Impedance
8 Ω
What the receiver must be rated for
Sensitivity
94.5 dB
Higher is louder per watt
Bass extension
44 Hz
How low it plays
Woofer
6.5 in
Nominal size

$700 a pair (MSRP, September 2026)

Check it with your receiverSee it in your room
3D model of the Klipsch RP-600M II

Drag to turn it. Built from the published dimensions, not a photo.

We earn a commission when you buy through these links. It never affects which products we show or recommend. Disclosure

Used on eBay

Which receivers and amps can drive it?

What decides it is impedance: the RP-600M II is 8 Ω, and the receiver or amp has to be rated for that.

  • Works

    Receivers and amps rated for 8 Ω

    29 in our catalogue

In its price range

All 29 receivers and amps we checked

Works29

Which center speaker matches it?

For the closest tonal match as voices move across the front, pick a center from the same Reference Premiere series.

Plan your room around the RP-600M II.

Draw your room in 3D, place the RP-600M II and see how they sound at your seat, with every connection to your receiver checked. Designing is free.

Build it in your room

RP-600M II specifications

Impedance
8 Ω
Sensitivity
94.5 dB (2.83 V, 1 m) in-room
Low end
44 Hz
Drivers
1 × 25 mm, 1 × 165 mm
Size
8×16×13 in
Weight
8.2 kg (18.1 lb)
MSRP
$700 a pair (MSRP, September 2026)

Every value comes from the sources under References, last retrieved September 14, 2026. To check it against the rest of your system, use the compatibility checker.

Questions about the RP-600M II

What receiver do I need for the RP-600M II?
One rated for 8 Ω speakers. In our catalogue, Denon AVR-S570BT, Emotiva BasX A-700 and Yamaha RX500A are rated to drive it.
Is the RP-600M II 4 ohm or 8 ohm?
The Klipsch RP-600M II has a nominal impedance of 8 Ω. Use a receiver or amplifier rated down to 8 Ω or lower.
How much power does the RP-600M II need?
Klipsch does not publish a recommended amplifier power. Its sensitivity is 94.5 dB (2.83 V, 1 m) in-room. How much of that you use depends on how far you sit and how loud you listen, which the 3D editor works out for your room.
How low does the RP-600M II go?
The Klipsch RP-600M II is rated down to 44 Hz. Below that, a subwoofer takes over; where the bass actually lands depends on your room's modes.
How big is the RP-600M II?
The Klipsch RP-600M II measures 202 × 400 × 330 mm (8 × 15.7 × 13 in, width × height × depth) and weighs 8.2 kg (18.1 lb).

Similar products

Side by side

References

  1. Klipsch RP-600M II: Spec sheet, assets.klipsch.com, retrieved September 14, 2026
  2. Klipsch RP-600M II: Retailer listing, sweetwater.com, retrieved September 14, 2026

Brand names are trademarks of their owners. Not affiliated with or endorsed by any manufacturer. 3D models are our approximations. Prices are manufacturer list prices (MSRP) as of the month shown. How we earn from buy links: affiliate disclosure.