Start

Monitor Audio Bronze 50 7G

Bronze 7G series

The Monitor Audio Bronze 50 7G is a bookshelf speaker with 8 Ω impedance and 86 dB sensitivity. Every receiver and amp in our catalogue can drive it.

Impedance
8 Ω
What the receiver must be rated for
Sensitivity
86 dB
Higher is louder per watt
Amplifier power
30–100 W
Monitor Audio's recommendation
Bass extension
41 Hz
How low it plays

$849 a pair (MSRP, September 2026)

Check it with your receiverSee it in your room
3D model of the Monitor Audio Bronze 50 7G

Drag to turn it. Built from the published dimensions, not a photo.

We earn a commission when you buy through these links. It never affects which products we show or recommend. Disclosure

Used on eBay

Which receivers and amps can drive it?

What decides it is impedance: the Bronze 50 7G is 8 Ω, and the receiver or amp has to be rated for that.

  • Works

    Receivers and amps rated for 8 Ω

    29 in our catalogue

In its price range

All 29 receivers and amps we checked

Works29

Which center speaker matches it?

No center in our catalogue is from the Bronze 7G series yet. Any center plays; one from the same series is the closest tonal match.

Plan your room around the Bronze 50 7G.

Draw your room in 3D, place the Bronze 50 7G and see how they sound at your seat, with every connection to your receiver checked. Designing is free.

Build it in your room

Bronze 50 7G specifications

Impedance
8 Ω
Sensitivity
86 dB (2.83 V, 1 m)
Low end
41 Hz
Drivers
1 × 25 mm, 1 × 152 mm
Size
7×13×13 in
Recommended amplifier power
30–100 W
Weight
6.4 kg (14.1 lb)
MSRP
$849 a pair (MSRP, September 2026)

Every value comes from the sources under References, last retrieved September 15, 2026. To check it against the rest of your system, use the compatibility checker.

Questions about the Bronze 50 7G

What receiver do I need for the Bronze 50 7G?
One rated for 8 Ω speakers. In our catalogue, Denon AVR-S570BT, Emotiva BasX A-700 and Yamaha RX500A are rated to drive it.
Is the Bronze 50 7G 4 ohm or 8 ohm?
The Monitor Audio Bronze 50 7G has a nominal impedance of 8 Ω. Use a receiver or amplifier rated down to 8 Ω or lower.
How much power does the Bronze 50 7G need?
Monitor Audio recommends an amplifier of 30–100 W. Its sensitivity is 86 dB (2.83 V, 1 m). How much of that you use depends on how far you sit and how loud you listen, which the 3D editor works out for your room.
How low does the Bronze 50 7G go?
The Monitor Audio Bronze 50 7G is rated down to 41 Hz. Below that, a subwoofer takes over; where the bass actually lands depends on your room's modes.
How big is the Bronze 50 7G?
The Monitor Audio Bronze 50 7G measures 185 × 335 × 328 mm (7.3 × 13.2 × 12.9 in, width × height × depth) and weighs 6.4 kg (14.1 lb).

Similar products

References

  1. Monitor Audio Bronze 50 7G: Manufacturer product page, monitoraudio.com, retrieved September 15, 2026
  2. Monitor Audio Bronze 50 7G: Retailer listing, audioadvice.com, retrieved September 15, 2026

Brand names are trademarks of their owners. Not affiliated with or endorsed by any manufacturer. 3D models are our approximations. Prices are manufacturer list prices (MSRP) as of the month shown. How we earn from buy links: affiliate disclosure.