Will the RX500A damage the Alpha 8in Carbon Fiber 2-way?

No. The RX500A is rated for the Alpha 8in Carbon Fiber 2-way's 8 Ω load as it comes.

What impedance setting should I use for the Alpha 8in Carbon Fiber 2-way on the RX500A?

None: the Alpha 8in Carbon Fiber 2-way is 8 Ω, and the RX500A needs no change for it.

Is the RX500A powerful enough for the Alpha 8in Carbon Fiber 2-way?

More than you need. From a seat 2 m away, loud 95 dB movie peaks take about 13 W per speaker, and the RX500A is rated 70 W per channel. Cinema reference level, 105 dB peaks, takes about 127 W.

Does the Monoprice Alpha 8in Carbon Fiber 2-way work with the Yamaha RX500A?

Verdict

Yes

The Alpha 8in Carbon Fiber 2-way is 8 Ω, and the RX500A is rated for speakers down to 4 Ω, so it drives them as is.

Speaker load

8 Ω speaker, rated down to 4 Ω

Power

70 W

More than you need. About 13 W gives 95 dB peaks at 2 m

Height decoding

Yes

Dolby Atmos and DTS:X

How to connect them

Connect the Alpha 8in Carbon Fiber 2-way speakers to the RX500A's height terminals with speaker wire.
Run Room Correction with its microphone at your seat.

Plan the Alpha 8in Carbon Fiber 2-way and RX500A in your own room.

Draw your room in 3D, place both, and see every connection checked and how loud they play at your seat. Designing is free.

Build it in your room

The specs that decide it

Monoprice Alpha 8in Carbon Fiber 2-way

Impedance: 8 Ω
Sensitivity: 90 dB (2.83 V, 1 m)
MSRP: $200 a pair (MSRP, September 2026)

All Alpha 8in Carbon Fiber 2-way specs and pairings

Yamaha RX500A

Amplifier channels: 7
Height formats: Dolby Atmos, DTS:X
Lowest speaker impedance: 4 Ω
MSRP: $600 each (MSRP, May 2026)

All RX500A specs and pairings

Questions about the Alpha 8in Carbon Fiber 2-way and RX500A

Does the Alpha 8in Carbon Fiber 2-way work with the RX500A?: Yes. The Alpha 8in Carbon Fiber 2-way is 8 Ω, and the RX500A is rated for speakers down to 4 Ω, so it drives them as is.
Will the RX500A damage the Alpha 8in Carbon Fiber 2-way?: No. The RX500A is rated for the Alpha 8in Carbon Fiber 2-way's 8 Ω load as it comes.
What impedance setting should I use for the Alpha 8in Carbon Fiber 2-way on the RX500A?: None: the Alpha 8in Carbon Fiber 2-way is 8 Ω, and the RX500A needs no change for it.
Is the RX500A powerful enough for the Alpha 8in Carbon Fiber 2-way?: More than you need. From a seat 2 m away, loud 95 dB movie peaks take about 13 W per speaker, and the RX500A is rated 70 W per channel. Cinema reference level, 105 dB peaks, takes about 127 W.

Swap one of them

Monoprice Alpha 8in Carbon Fiber 2-way + Denon AVR-S670HNot recommended
Monoprice Alpha 8in Carbon Fiber 2-way + Denon AVR-X1700HWorks
Klipsch R-50C + Yamaha RX500AWorks
Klipsch CDT-3650-C II + Yamaha RX500AWorks

References

Specs verified against the manufacturer's published data. Last checked September 15, 2026.

Brand names are trademarks of their owners. Not affiliated with or endorsed by any manufacturer. 3D models are our approximations. Prices are manufacturer list prices (MSRP) as of the month shown. How we earn from buy links: affiliate disclosure.