Monoprice M-12 V2
Powered subwoofer · Monolith series · Discontinued
Drag to turn the model. It is built from the published dimensions, not a photo.
The Monoprice M-12 V2 is a powered subwoofer with a 500 W amplifier and a 12-inch driver, rated down to 18 Hz. It has line-level inputs; all 26 receivers and processors in our catalogue connect to it.
$900 each (MSRP, October 2025)
We earn a commission when you buy through these links. It never affects which products we show or recommend. Disclosure
Receivers and processors for the M-12 V2
Each pairing is checked by our compatibility engine against the subwoofer's inputs and the unit's subwoofer outputs.
Connects (26)
- Denon AVR-S570BT
5 amplified channels · 70 W at 8 Ω
- Yamaha RX500A
7 amplified channels · 70 W at 8 Ω
- Denon AVR-S670H
5 amplified channels · 75 W at 8 Ω
- Denon AVR-X1700H
7 amplified channels · 80 W at 8 Ω
- Denon AVR-S770H
7 amplified channels · 75 W at 8 Ω
- Onkyo TX-NR6100
7 amplified channels · 100 W at 8 Ω
- Yamaha RX-V6A
7 amplified channels · 100 W at 8 Ω
- Denon AVR-X1800H
7 amplified channels · 80 W at 8 Ω
- Denon AVR-S970H
7 amplified channels · 90 W at 8 Ω
- Onkyo TX-RZ30
9 amplified channels · 100 W at 8 Ω
- Pioneer VSX-LX305
9 amplified channels · 100 W at 8 Ω
- Onkyo TX-NR7100
9 amplified channels · 100 W at 8 Ω
- Marantz Cinema 70s
7 amplified channels · 50 W at 8 Ω
- Denon AVR-X2900H
7 amplified channels · 95 W at 8 Ω
- Pioneer VSX-LX505
9 amplified channels · 120 W at 8 Ω
- Onkyo TX-RZ50
9 amplified channels · 120 W at 8 Ω
- Denon AVR-X3800H
9 amplified channels · 105 W at 8 Ω
- Denon AVR-X3900H
9 amplified channels · 105 W at 8 Ω
- Marantz AV7706
11 channels, no amplifiers · Dolby Atmos
- Denon AVR-X4800H
9 amplified channels · 125 W at 8 Ω
- Marantz Cinema 50
9 amplified channels · 110 W at 8 Ω
- Denon AVR-X6800H
11 amplified channels · 140 W at 8 Ω
- Anthem AVM 70 8K
15 channels, no amplifiers · Dolby Atmos
- Monoprice HTP-1
15 channels, no amplifiers · Dolby Atmos
- Emotiva RMC-1L
15 channels, no amplifiers · Dolby Atmos
- Marantz AV 10
15 channels, no amplifiers · Dolby Atmos
M-12 V2 specifications
| Amplifier | 500 W |
|---|---|
| Drivers | 1 × 305 mm |
| Low end | 18 Hz |
| Inputs | Line |
| Size | 17×23×24 in |
| Weight | 44.7 kg (98.5 lb) |
| MSRP | $900 each (MSRP, October 2025) |
Every value comes from the sources under References, last retrieved September 15, 2026. To check it against the rest of your system, use the compatibility checker.
Questions about the M-12 V2
- What receiver works with the M-12 V2?
- Any receiver or processor with a subwoofer output. In our catalogue that includes Denon AVR-S570BT, Yamaha RX500A and Denon AVR-S670H.
- How powerful is the M-12 V2?
- The Monoprice M-12 V2 has a 500 W continuous amplifier.
- How low does the M-12 V2 go?
- The Monoprice M-12 V2 is rated down to 18 Hz. In a room, modes can lift or cancel bass by more than 10 dB, so placement matters as much as the rating.
- Does the M-12 V2 have speaker-level inputs?
- No. It connects with a line-level (RCA or LFE) input only.
- How big is the M-12 V2?
- The Monoprice M-12 V2 measures 425 × 580 × 600 mm (16.7 × 22.8 × 23.6 in, width × height × depth) and weighs 44.7 kg (98.5 lb).
Similar products
References
Brand names are trademarks of their owners. Not affiliated with or endorsed by any manufacturer. 3D models are our approximations. Prices are manufacturer list prices (MSRP) as of the month shown. How we earn from buy links: affiliate disclosure.