Will the AVR-S670H damage the Monitor SE 2000C?

No. The AVR-S670H is rated for the Monitor SE 2000C's 8 Ω load as it comes.

What impedance setting should I use for the Monitor SE 2000C on the AVR-S670H?

None: the Monitor SE 2000C is 8 Ω, and the AVR-S670H needs no change for it.

Is the AVR-S670H powerful enough for the Monitor SE 2000C?

More than you need. From a seat 2 m away, loud 95 dB movie peaks take about 7 W per speaker, and the AVR-S670H is rated 75 W per channel. Cinema reference level, 105 dB peaks, takes about 64 W.

Does the Paradigm Monitor SE 2000C work with the Denon AVR-S670H?

Verdict

Yes

The Monitor SE 2000C is 8 Ω, and the AVR-S670H is rated for speakers down to 4 Ω, so it drives them as is.

Speaker load

8 Ω speaker, rated down to 4 Ω

Power

75 W

More than you need. About 7 W gives 95 dB peaks at 2 m

How to connect them

Connect the Monitor SE 2000C speakers to the AVR-S670H's front terminals with speaker wire.
Run Audyssey MultEQ with its microphone at your seat.

Plan the Monitor SE 2000C and AVR-S670H in your own room.

Draw your room in 3D, place both, and see every connection checked and how loud they play at your seat. Designing is free.

Build it in your room

The specs that decide it

Paradigm Monitor SE 2000C

Impedance: 8 Ω
Sensitivity: 93 dB (2.83 V, 1 m) in-room
Recommended amplifier power: 15–100 W
MSRP: $300 each (MSRP, September 2026)

All Monitor SE 2000C specs and pairings

Denon AVR-S670H

Amplifier channels: 5
Height formats: None
Lowest speaker impedance: 4 Ω
MSRP: $649 each (MSRP, September 2026)

All AVR-S670H specs and pairings

Questions about the Monitor SE 2000C and AVR-S670H

Does the Monitor SE 2000C work with the AVR-S670H?: Yes. The Monitor SE 2000C is 8 Ω, and the AVR-S670H is rated for speakers down to 4 Ω, so it drives them as is.
Will the AVR-S670H damage the Monitor SE 2000C?: No. The AVR-S670H is rated for the Monitor SE 2000C's 8 Ω load as it comes.
What impedance setting should I use for the Monitor SE 2000C on the AVR-S670H?: None: the Monitor SE 2000C is 8 Ω, and the AVR-S670H needs no change for it.
Is the AVR-S670H powerful enough for the Monitor SE 2000C?: More than you need. From a seat 2 m away, loud 95 dB movie peaks take about 7 W per speaker, and the AVR-S670H is rated 75 W per channel. Cinema reference level, 105 dB peaks, takes about 64 W.

Swap one of them

References

Specs verified against the manufacturer's published data. Last checked September 15, 2026.

Brand names are trademarks of their owners. Not affiliated with or endorsed by any manufacturer. 3D models are our approximations. Prices are manufacturer list prices (MSRP) as of the month shown. How we earn from buy links: affiliate disclosure.