Will the TX-RZ30 damage the Monitor SE 6000F?

No. The TX-RZ30 is rated for the Monitor SE 6000F's 8 Ω load as it comes.

What impedance setting should I use for the Monitor SE 6000F on the TX-RZ30?

None: the Monitor SE 6000F is 8 Ω, and the TX-RZ30 needs no change for it.

Is the TX-RZ30 powerful enough for the Monitor SE 6000F?

More than you need. From a seat 2 m away, loud 95 dB movie peaks take about 7 W per speaker, and the TX-RZ30 is rated 100 W per channel. Cinema reference level, 105 dB peaks, takes about 64 W.

Does the Paradigm Monitor SE 6000F work with the Onkyo TX-RZ30?

Verdict

Yes

The Monitor SE 6000F is 8 Ω, and the TX-RZ30 is rated for speakers down to 4 Ω, so it drives them as is.

Speaker load

8 Ω speaker, rated down to 4 Ω

Power

100 W

More than you need. About 7 W gives 95 dB peaks at 2 m

How to connect them

Connect the Monitor SE 6000F speakers to the TX-RZ30's front terminals with speaker wire.
Run Dirac Live with its microphone at your seat.

Plan the Monitor SE 6000F and TX-RZ30 in your own room.

Draw your room in 3D, place both, and see every connection checked and how loud they play at your seat. Designing is free.

Build it in your room

The specs that decide it

Paradigm Monitor SE 6000F

Impedance: 8 Ω
Sensitivity: 93 dB (2.83 V, 1 m) in-room
Recommended amplifier power: 15–130 W
MSRP: $600 each (MSRP, September 2026)

All Monitor SE 6000F specs and pairings

Onkyo TX-RZ30

Amplifier channels: 9
Height formats: Dolby Atmos, DTS:X
Lowest speaker impedance: 4 Ω
MSRP: $1,000 each (MSRP, September 2025)

All TX-RZ30 specs and pairings

Questions about the Monitor SE 6000F and TX-RZ30

Does the Monitor SE 6000F work with the TX-RZ30?: Yes. The Monitor SE 6000F is 8 Ω, and the TX-RZ30 is rated for speakers down to 4 Ω, so it drives them as is.
Will the TX-RZ30 damage the Monitor SE 6000F?: No. The TX-RZ30 is rated for the Monitor SE 6000F's 8 Ω load as it comes.
What impedance setting should I use for the Monitor SE 6000F on the TX-RZ30?: None: the Monitor SE 6000F is 8 Ω, and the TX-RZ30 needs no change for it.
Is the TX-RZ30 powerful enough for the Monitor SE 6000F?: More than you need. From a seat 2 m away, loud 95 dB movie peaks take about 7 W per speaker, and the TX-RZ30 is rated 100 W per channel. Cinema reference level, 105 dB peaks, takes about 64 W.

Swap one of them

References

Specs verified against the manufacturer's published data. Last checked September 15, 2026.

Brand names are trademarks of their owners. Not affiliated with or endorsed by any manufacturer. 3D models are our approximations. Prices are manufacturer list prices (MSRP) as of the month shown. How we earn from buy links: affiliate disclosure.