Will the AVR-X1700H damage the Monitor SE Atom?

No. The AVR-X1700H is rated for the Monitor SE Atom's 8 Ω load as it comes.

What impedance setting should I use for the Monitor SE Atom on the AVR-X1700H?

None: the Monitor SE Atom is 8 Ω, and the AVR-X1700H needs no change for it.

Is the AVR-X1700H powerful enough for the Monitor SE Atom?

More than you need. From a seat 2 m away, loud 95 dB movie peaks take about 16 W per speaker, and the AVR-X1700H is rated 80 W per channel. Cinema reference level, 105 dB peaks, takes about 160 W.

Does the Paradigm Monitor SE Atom work with the Denon AVR-X1700H?

Verdict

Yes

The Monitor SE Atom is 8 Ω, and the AVR-X1700H is rated for speakers down to 4 Ω, so it drives them as is.

Speaker load

8 Ω speaker, rated down to 4 Ω

Power

80 W

More than you need. About 16 W gives 95 dB peaks at 2 m

How to connect them

Connect the Monitor SE Atom speakers to the AVR-X1700H's front terminals with speaker wire.
Run Audyssey MultEQ XT with its microphone at your seat.

Plan the Monitor SE Atom and AVR-X1700H in your own room.

Draw your room in 3D, place both, and see every connection checked and how loud they play at your seat. Designing is free.

Build it in your room

The specs that decide it

Paradigm Monitor SE Atom

Impedance: 8 Ω
Sensitivity: 89 dB (2.83 V, 1 m) in-room
Recommended amplifier power: 15–100 W
MSRP: $400 a pair (MSRP, September 2026)

All Monitor SE Atom specs and pairings

Denon AVR-X1700H

Amplifier channels: 7
Height formats: Dolby Atmos, DTS:X
Lowest speaker impedance: 4 Ω
MSRP: $649 each (MSRP, September 2026)

All AVR-X1700H specs and pairings

Questions about the Monitor SE Atom and AVR-X1700H

Does the Monitor SE Atom work with the AVR-X1700H?: Yes. The Monitor SE Atom is 8 Ω, and the AVR-X1700H is rated for speakers down to 4 Ω, so it drives them as is.
Will the AVR-X1700H damage the Monitor SE Atom?: No. The AVR-X1700H is rated for the Monitor SE Atom's 8 Ω load as it comes.
What impedance setting should I use for the Monitor SE Atom on the AVR-X1700H?: None: the Monitor SE Atom is 8 Ω, and the AVR-X1700H needs no change for it.
Is the AVR-X1700H powerful enough for the Monitor SE Atom?: More than you need. From a seat 2 m away, loud 95 dB movie peaks take about 16 W per speaker, and the AVR-X1700H is rated 80 W per channel. Cinema reference level, 105 dB peaks, takes about 160 W.

Swap one of them

References

Specs verified against the manufacturer's published data. Last checked September 15, 2026.

Brand names are trademarks of their owners. Not affiliated with or endorsed by any manufacturer. 3D models are our approximations. Prices are manufacturer list prices (MSRP) as of the month shown. How we earn from buy links: affiliate disclosure.