Will the TX-NR6100 damage the Monitor SE Atom?

No. The TX-NR6100 is rated for the Monitor SE Atom's 8 Ω load as it comes.

What impedance setting should I use for the Monitor SE Atom on the TX-NR6100?

None: the Monitor SE Atom is 8 Ω, and the TX-NR6100 needs no change for it.

Is the TX-NR6100 powerful enough for the Monitor SE Atom?

More than you need. From a seat 2 m away, loud 95 dB movie peaks take about 16 W per speaker, and the TX-NR6100 is rated 100 W per channel. Cinema reference level, 105 dB peaks, takes about 160 W.

Does the Paradigm Monitor SE Atom work with the Onkyo TX-NR6100?

Verdict

Yes

The Monitor SE Atom is 8 Ω, and the TX-NR6100 is rated for speakers down to 4 Ω, so it drives them as is.

Speaker load

8 Ω speaker, rated down to 4 Ω

Power

100 W

More than you need. About 16 W gives 95 dB peaks at 2 m

How to connect them

Connect the Monitor SE Atom speakers to the TX-NR6100's front terminals with speaker wire.
Run AccuEQ with its microphone at your seat.

Plan the Monitor SE Atom and TX-NR6100 in your own room.

Draw your room in 3D, place both, and see every connection checked and how loud they play at your seat. Designing is free.

Build it in your room

The specs that decide it

Paradigm Monitor SE Atom

Impedance: 8 Ω
Sensitivity: 89 dB (2.83 V, 1 m) in-room
Recommended amplifier power: 15–100 W
MSRP: $400 a pair (MSRP, September 2026)

All Monitor SE Atom specs and pairings

Onkyo TX-NR6100

Amplifier channels: 7
Height formats: Dolby Atmos, DTS:X
Lowest speaker impedance: 4 Ω
MSRP: $799 each (MSRP, May 2025)

All TX-NR6100 specs and pairings

Questions about the Monitor SE Atom and TX-NR6100

Does the Monitor SE Atom work with the TX-NR6100?: Yes. The Monitor SE Atom is 8 Ω, and the TX-NR6100 is rated for speakers down to 4 Ω, so it drives them as is.
Will the TX-NR6100 damage the Monitor SE Atom?: No. The TX-NR6100 is rated for the Monitor SE Atom's 8 Ω load as it comes.
What impedance setting should I use for the Monitor SE Atom on the TX-NR6100?: None: the Monitor SE Atom is 8 Ω, and the TX-NR6100 needs no change for it.
Is the TX-NR6100 powerful enough for the Monitor SE Atom?: More than you need. From a seat 2 m away, loud 95 dB movie peaks take about 16 W per speaker, and the TX-NR6100 is rated 100 W per channel. Cinema reference level, 105 dB peaks, takes about 160 W.

Swap one of them

ELAC A4.2 + Onkyo TX-NR6100Works
ELAC DB53 + Onkyo TX-NR6100Works

References

Specs verified against the manufacturer's published data. Last checked September 15, 2026.

Brand names are trademarks of their owners. Not affiliated with or endorsed by any manufacturer. 3D models are our approximations. Prices are manufacturer list prices (MSRP) as of the month shown. How we earn from buy links: affiliate disclosure.