Start

Polk Signature Elite ES10

Signature Elite series

The Polk Signature Elite ES10 is a surround speaker with 8 Ω impedance and 87 dB sensitivity. Every receiver and amp in our catalogue can drive it.

Impedance
8 Ω
What the receiver must be rated for
Sensitivity
87 dB
Higher is louder per watt
Amplifier power
20–100 W
Polk's recommendation
Bass extension
75 Hz
How low it plays

$249 a pair (MSRP, September 2026)

Check it with your receiverSee it in your room
3D model of the Polk Signature Elite ES10

Drag to turn it. Built from the published dimensions, not a photo.

We earn a commission when you buy through these links. It never affects which products we show or recommend. Disclosure

Used on eBay

Which receivers and amps can drive it?

What decides it is impedance: the Signature Elite ES10 is 8 Ω, and the receiver or amp has to be rated for that.

  • Works

    Receivers and amps rated for 8 Ω

    29 in our catalogue

In its price range

All 29 receivers and amps we checked

Works29

Plan your room around the Signature Elite ES10.

Draw your room in 3D, place the Signature Elite ES10 and see how they sound at your seat, with every connection to your receiver checked. Designing is free.

Build it in your room

Signature Elite ES10 specifications

Impedance
8 Ω
Sensitivity
87 dB
Low end
75 Hz
Drivers
1 × 25 mm, 1 × 102 mm
Size
5×8×6 in
Recommended amplifier power
20–100 W
Weight
2.7 kg (6 lb)
MSRP
$249 a pair (MSRP, September 2026)

Every value comes from the sources under References, last retrieved September 15, 2026. To check it against the rest of your system, use the compatibility checker.

Questions about the Signature Elite ES10

What receiver do I need for the Signature Elite ES10?
One rated for 8 Ω speakers. In our catalogue, Denon AVR-S570BT, Emotiva BasX A-700 and Yamaha RX500A are rated to drive it.
Is the Signature Elite ES10 4 ohm or 8 ohm?
The Polk Signature Elite ES10 has a nominal impedance of 8 Ω. Use a receiver or amplifier rated down to 8 Ω or lower.
How much power does the Signature Elite ES10 need?
Polk recommends an amplifier of 20–100 W. Its sensitivity is 87 dB. How much of that you use depends on how far you sit and how loud you listen, which the 3D editor works out for your room.
How low does the Signature Elite ES10 go?
The Polk Signature Elite ES10 is rated down to 75 Hz. Below that, a subwoofer takes over; where the bass actually lands depends on your room's modes.
How big is the Signature Elite ES10?
The Polk Signature Elite ES10 measures 137 × 213 × 155 mm (5.4 × 8.4 × 6.1 in, width × height × depth) and weighs 2.7 kg (6 lb).

Similar products

References

  1. Polk Signature Elite ES10: Spec sheet, polkaudio.com, retrieved September 15, 2026
  2. Polk Signature Elite ES10: Manufacturer product page, polkaudio.com, retrieved September 15, 2026

Brand names are trademarks of their owners. Not affiliated with or endorsed by any manufacturer. 3D models are our approximations. Prices are manufacturer list prices (MSRP) as of the month shown. How we earn from buy links: affiliate disclosure.