Does the Lumina I work with the AVR-X2900H?

Yes, with one setting change. The Lumina I is 4 Ω: set the receiver to 4 Ω in its speaker setup.

Will the AVR-X2900H damage the Lumina I?

Not once it is set up for it: the AVR-X2900H is rated for a 4 Ω speaker with its speaker impedance set to 4 Ω.

Is the AVR-X2900H powerful enough for the Lumina I?

Too weak. From a seat 2 m away, loud 95 dB movie peaks take about 101 W per speaker, and the AVR-X2900H is rated 95 W per channel. Cinema reference level, 105 dB peaks, takes about 1005 W.

Does the Sonus faber Lumina I work with the Denon AVR-X2900H?

Verdict

Yes, set it to 4 Ω

The Lumina I is 4 Ω: set the receiver to 4 Ω in its speaker setup.

Speaker load

Set 4 Ω

4 Ω speaker, change it in speaker setup

Power

95 W

Too weak. About 101 W gives 95 dB peaks at 2 m

How to connect them

Connect the Lumina I speakers to the AVR-X2900H's front terminals with speaker wire.
In the AVR-X2900H's speaker setup, set speaker impedance to 4 Ω.
Run Audyssey MultEQ XT with its microphone at your seat.

Plan the Lumina I and AVR-X2900H in your own room.

Draw your room in 3D, place both, and see every connection checked and how loud they play at your seat. Designing is free.

Build it in your room

The specs that decide it

Sonus faber Lumina I

Impedance: 4 Ω
Sensitivity: 84 dB (2.83 V, 1 m)
Recommended amplifier power: 30–100 W
MSRP: $1,200 a pair (MSRP, September 2026)

All Lumina I specs and pairings

Denon AVR-X2900H

Amplifier channels: 7
Height formats: Dolby Atmos, DTS:X
Lowest speaker impedance: 4 Ω
MSRP: $1,349 each (MSRP, September 2026)

All AVR-X2900H specs and pairings

Questions about the Lumina I and AVR-X2900H

Does the Lumina I work with the AVR-X2900H?: Yes, with one setting change. The Lumina I is 4 Ω: set the receiver to 4 Ω in its speaker setup.
Will the AVR-X2900H damage the Lumina I?: Not once it is set up for it: the AVR-X2900H is rated for a 4 Ω speaker with its speaker impedance set to 4 Ω.
What impedance setting should I use for the Lumina I on the AVR-X2900H?: 4 Ω. Set the receiver to 4 Ω in its speaker setup.
Is the AVR-X2900H powerful enough for the Lumina I?: Too weak. From a seat 2 m away, loud 95 dB movie peaks take about 101 W per speaker, and the AVR-X2900H is rated 95 W per channel. Cinema reference level, 105 dB peaks, takes about 1005 W.

Swap one of them

References

Specs verified against the manufacturer's published data. Last checked September 15, 2026.

Brand names are trademarks of their owners. Not affiliated with or endorsed by any manufacturer. 3D models are our approximations. Prices are manufacturer list prices (MSRP) as of the month shown. How we earn from buy links: affiliate disclosure.