What receiver works with the PB-3000 R|Evolution?

Any receiver or processor with a subwoofer output. In our catalogue that includes Denon AVR-S570BT, Yamaha RX500A and Denon AVR-S670H.

How powerful is the PB-3000 R|Evolution?

The SVS PB-3000 R|Evolution has a 1,200 W continuous amplifier.

How low does the PB-3000 R|Evolution go?

The SVS PB-3000 R|Evolution is rated down to 16 Hz. In a room, modes can lift or cancel bass by more than 10 dB, so placement matters as much as the rating.

Does the PB-3000 R|Evolution have speaker-level inputs?

No. It connects with a line-level (RCA or LFE) input only.

How big is the PB-3000 R|Evolution?

The SVS PB-3000 R|Evolution measures 465 × 557 × 597 mm (18.3 × 21.9 × 23.5 in, width × height × depth) and weighs 38.6 kg (85.1 lb).

SVS PB-3000 R|Evolution

3000 R|Evolution Series

The SVS PB-3000 R|Evolution is a powered subwoofer with a 1,200 W amplifier and a 13-inch driver, rated down to 16 Hz. It connects to all 26 receivers and processors in our catalogue.

Amplifier

1,200 W

Continuous power

Driver

13 in

One driver

Bass extension

16 Hz

Lowest rated frequency

$1,800 each (MSRP, September 2026)

Check it with your receiver See it in your room

Drag to turn it. Built from the published dimensions, not a photo.

We earn a commission when you buy through these links. It never affects which products we show or recommend. Disclosure

Used on eBay

Which receivers connect to it?

It takes a line-level input, so any receiver or processor with a subwoofer output can feed it.

Connects
Receivers and processors with a subwoofer output
26 in our catalogue

In its price range

All 26 receivers and processors we checked

Connects26

Denon AVR-S570BT
5 amplified channels · 70 W at 8 Ω
Yamaha RX500A
7 amplified channels · 70 W at 8 Ω
Denon AVR-S670H
5 amplified channels · 75 W at 8 Ω
Denon AVR-X1700H
7 amplified channels · 80 W at 8 Ω
Denon AVR-S770H
7 amplified channels · 75 W at 8 Ω
Onkyo TX-NR6100
7 amplified channels · 100 W at 8 Ω
Yamaha RX-V6A
7 amplified channels · 100 W at 8 Ω
Denon AVR-X1800H
7 amplified channels · 80 W at 8 Ω
Denon AVR-S970H
7 amplified channels · 90 W at 8 Ω
Onkyo TX-RZ30
9 amplified channels · 100 W at 8 Ω
Pioneer VSX-LX305
9 amplified channels · 100 W at 8 Ω
Onkyo TX-NR7100
9 amplified channels · 100 W at 8 Ω
Marantz Cinema 70s
7 amplified channels · 50 W at 8 Ω
Denon AVR-X2900H
7 amplified channels · 95 W at 8 Ω
Pioneer VSX-LX505
9 amplified channels · 120 W at 8 Ω
Onkyo TX-RZ50
9 amplified channels · 120 W at 8 Ω
Denon AVR-X3800H
9 amplified channels · 105 W at 8 Ω
Denon AVR-X3900H
9 amplified channels · 105 W at 8 Ω
Marantz AV7706
11 channels, no amplifiers · Dolby Atmos
Denon AVR-X4800H
9 amplified channels · 125 W at 8 Ω
Marantz Cinema 50
9 amplified channels · 110 W at 8 Ω
Denon AVR-X6800H
11 amplified channels · 140 W at 8 Ω
Anthem AVM 70 8K
15 channels, no amplifiers · Dolby Atmos
Monoprice HTP-1
15 channels, no amplifiers · Dolby Atmos
Emotiva RMC-1L
15 channels, no amplifiers · Dolby Atmos
Marantz AV 10
15 channels, no amplifiers · Dolby Atmos

Plan your room around the PB-3000 R|Evolution.

Draw your room in 3D, place the PB-3000 R|Evolution and see where its bass lands at your seat before you buy. Designing is free.

Build it in your room

PB-3000 R|Evolution specifications

Amplifier: 1200 W
Drivers: 1 × 330 mm
Low end: 16 Hz
Inputs: Line
Size: 18×22×24 in
Weight: 38.6 kg (85.1 lb)
MSRP: $1,800 each (MSRP, September 2026)

Every value comes from the sources under References, last retrieved September 15, 2026. To check it against the rest of your system, use the compatibility checker.

Questions about the PB-3000 R|Evolution

What receiver works with the PB-3000 R|Evolution?: Any receiver or processor with a subwoofer output. In our catalogue that includes Denon AVR-S570BT, Yamaha RX500A and Denon AVR-S670H.
How powerful is the PB-3000 R|Evolution?: The SVS PB-3000 R|Evolution has a 1,200 W continuous amplifier.
How low does the PB-3000 R|Evolution go?: The SVS PB-3000 R|Evolution is rated down to 16 Hz. In a room, modes can lift or cancel bass by more than 10 dB, so placement matters as much as the rating.
Does the PB-3000 R|Evolution have speaker-level inputs?: No. It connects with a line-level (RCA or LFE) input only.
How big is the PB-3000 R|Evolution?: The SVS PB-3000 R|Evolution measures 465 × 557 × 597 mm (18.3 × 21.9 × 23.5 in, width × height × depth) and weighs 38.6 kg (85.1 lb).

References

Brand names are trademarks of their owners. Not affiliated with or endorsed by any manufacturer. 3D models are our approximations. Prices are manufacturer list prices (MSRP) as of the month shown. How we earn from buy links: affiliate disclosure.