Start

SVS Prime Pinnacle

Prime series

The SVS Prime Pinnacle is a tower speaker with 8 Ω impedance and 88 dB sensitivity. Every receiver and amp in our catalogue can drive it.

Impedance
8 Ω
What the receiver must be rated for
Sensitivity
88 dB
Higher is louder per watt
Amplifier power
20–300 W
SVS's recommendation
Bass extension
29 Hz
How low it plays

$1,000 each (MSRP, September 2026)

Check it with your receiverSee it in your room
3D model of the SVS Prime Pinnacle

Drag to turn it. Built from the published dimensions, not a photo.

We earn a commission when you buy through these links. It never affects which products we show or recommend. Disclosure

Used on eBay

Which receivers and amps can drive it?

What decides it is impedance: the Prime Pinnacle is 8 Ω, and the receiver or amp has to be rated for that.

  • Works

    Receivers and amps rated for 8 Ω

    29 in our catalogue

In its price range

All 29 receivers and amps we checked

Works29

Which center speaker matches it?

For the closest tonal match as voices move across the front, pick a center from the same Prime series.

Plan your room around the Prime Pinnacle.

Draw your room in 3D, place the Prime Pinnacle and see how they sound at your seat, with every connection to your receiver checked. Designing is free.

Build it in your room

Prime Pinnacle specifications

Impedance
8 Ω
Sensitivity
88 dB (2.83 V, 1 m)
Low end
29 Hz
Drivers
1 × 25 mm, 1 × 133 mm, 3 × 165 mm
Size
8×41×13 in
Recommended amplifier power
20–300 W
Weight
25.9 kg (57.1 lb)
MSRP
$1,000 each (MSRP, September 2026)

Every value comes from the sources under References, last retrieved September 15, 2026. To check it against the rest of your system, use the compatibility checker.

Questions about the Prime Pinnacle

What receiver do I need for the Prime Pinnacle?
One rated for 8 Ω speakers. In our catalogue, Denon AVR-S570BT, Emotiva BasX A-700 and Yamaha RX500A are rated to drive it.
Is the Prime Pinnacle 4 ohm or 8 ohm?
The SVS Prime Pinnacle has a nominal impedance of 8 Ω. Use a receiver or amplifier rated down to 8 Ω or lower.
How much power does the Prime Pinnacle need?
SVS recommends an amplifier of 20–300 W. Its sensitivity is 88 dB (2.83 V, 1 m). How much of that you use depends on how far you sit and how loud you listen, which the 3D editor works out for your room.
How low does the Prime Pinnacle go?
The SVS Prime Pinnacle is rated down to 29 Hz. Below that, a subwoofer takes over; where the bass actually lands depends on your room's modes.
How big is the Prime Pinnacle?
The SVS Prime Pinnacle measures 203 × 1029 × 340 mm (8 × 40.5 × 13.4 in, width × height × depth) and weighs 25.9 kg (57.1 lb).

Similar products

References

  1. SVS Prime Pinnacle: Manufacturer product page, svsound.com, retrieved September 15, 2026
  2. SVS Prime Pinnacle: Owner's manual, system.na1.netsuite.com, retrieved September 15, 2026

Brand names are trademarks of their owners. Not affiliated with or endorsed by any manufacturer. 3D models are our approximations. Prices are manufacturer list prices (MSRP) as of the month shown. How we earn from buy links: affiliate disclosure.