What receiver do I need for the Prime Tower?

One rated for 8 Ω speakers. In our catalogue, Denon AVR-S570BT, Emotiva BasX A-700 and Yamaha RX500A are rated to drive it.

Is the Prime Tower 4 ohm or 8 ohm?

The SVS Prime Tower has a nominal impedance of 8 Ω. Use a receiver or amplifier rated down to 8 Ω or lower.

How much power does the Prime Tower need?

SVS recommends an amplifier of 20–250 W. Its sensitivity is 87 dB (2.83 V, 1 m). How much of that you use depends on how far you sit and how loud you listen, which the 3D editor works out for your room.

How low does the Prime Tower go?

The SVS Prime Tower is rated down to 30 Hz. Below that, a subwoofer takes over; where the bass actually lands depends on your room's modes.

How big is the Prime Tower?

The SVS Prime Tower measures 203 × 914 × 274 mm (8 × 36 × 10.8 in, width × height × depth) and weighs 18.2 kg (40.1 lb).

SVS Prime Tower

Prime series

The SVS Prime Tower is a tower speaker with 8 Ω impedance and 87 dB sensitivity. Every receiver and amp in our catalogue can drive it.

Impedance

8 Ω

What the receiver must be rated for

Sensitivity

87 dB

Higher is louder per watt

Amplifier power

20–250 W

SVS's recommendation

Bass extension

30 Hz

How low it plays

$700 each (MSRP, September 2026)

Check it with your receiver See it in your room

Drag to turn it. Built from the published dimensions, not a photo.

We earn a commission when you buy through these links. It never affects which products we show or recommend. Disclosure

Used on eBay

Which receivers and amps can drive it?

What decides it is impedance: the Prime Tower is 8 Ω, and the receiver or amp has to be rated for that.

Works
Receivers and amps rated for 8 Ω
29 in our catalogue

In its price range

All 29 receivers and amps we checked

Works29

Denon AVR-S570BT
5 amplified channels · 70 W at 8 Ω
Emotiva BasX A-700
7 channels · 110 W at 8 Ω
Yamaha RX500A
7 amplified channels · 70 W at 8 Ω
Denon AVR-S670H
5 amplified channels · 75 W at 8 Ω
Denon AVR-X1700H
7 amplified channels · 80 W at 8 Ω
Monoprice M7100X
7 channels · 90 W at 8 Ω
Denon AVR-S770H
7 amplified channels · 75 W at 8 Ω
Onkyo TX-NR6100
7 amplified channels · 100 W at 8 Ω
Yamaha RX-V6A
7 amplified channels · 100 W at 8 Ω
Crown XLS 1502
2 channels · 300 W at 8 Ω
Denon AVR-X1800H
7 amplified channels · 80 W at 8 Ω
Denon AVR-S970H
7 amplified channels · 90 W at 8 Ω
Onkyo TX-RZ30
9 amplified channels · 100 W at 8 Ω
Pioneer VSX-LX305
9 amplified channels · 100 W at 8 Ω
Onkyo TX-NR7100
9 amplified channels · 100 W at 8 Ω
Marantz Cinema 70s
7 amplified channels · 50 W at 8 Ω
Denon AVR-X2900H
7 amplified channels · 95 W at 8 Ω
Pioneer VSX-LX505
9 amplified channels · 120 W at 8 Ω
Emotiva XPA-2 Gen3
2 channels · 300 W at 8 Ω
Onkyo TX-RZ50
9 amplified channels · 120 W at 8 Ω
Denon AVR-X3800H
9 amplified channels · 105 W at 8 Ω
Denon AVR-X3900H
9 amplified channels · 105 W at 8 Ω
Monoprice Monolith 7X
7 channels · 200 W at 8 Ω
Emotiva XPA-5 Gen3
5 channels · 250 W at 8 Ω
Denon AVR-X4800H
9 amplified channels · 125 W at 8 Ω
Marantz Cinema 50
9 amplified channels · 110 W at 8 Ω
Denon AVR-X6800H
11 amplified channels · 140 W at 8 Ω
ATI AT525NC
5 channels · 200 W at 8 Ω
Parasound Halo A 21+
2 channels · 300 W at 8 Ω

Which center speaker matches it?

For the closest tonal match as voices move across the front, pick a center from the same Prime series.

SVS Prime Center
$450 · 8 Ω · 86 dB

Plan your room around the Prime Tower.

Draw your room in 3D, place the Prime Tower and see how they sound at your seat, with every connection to your receiver checked. Designing is free.

Build it in your room

Prime Tower specifications

Impedance: 8 Ω
Sensitivity: 87 dB (2.83 V, 1 m)
Low end: 30 Hz
Drivers: 1 × 25 mm, 1 × 114 mm, 2 × 165 mm
Size: 8×36×11 in
Recommended amplifier power: 20–250 W
Weight: 18.2 kg (40.1 lb)
MSRP: $700 each (MSRP, September 2026)

Every value comes from the sources under References, last retrieved September 14, 2026. To check it against the rest of your system, use the compatibility checker.

Questions about the Prime Tower

What receiver do I need for the Prime Tower?: One rated for 8 Ω speakers. In our catalogue, Denon AVR-S570BT, Emotiva BasX A-700 and Yamaha RX500A are rated to drive it.
Is the Prime Tower 4 ohm or 8 ohm?: The SVS Prime Tower has a nominal impedance of 8 Ω. Use a receiver or amplifier rated down to 8 Ω or lower.
How much power does the Prime Tower need?: SVS recommends an amplifier of 20–250 W. Its sensitivity is 87 dB (2.83 V, 1 m). How much of that you use depends on how far you sit and how loud you listen, which the 3D editor works out for your room.
How low does the Prime Tower go?: The SVS Prime Tower is rated down to 30 Hz. Below that, a subwoofer takes over; where the bass actually lands depends on your room's modes.
How big is the Prime Tower?: The SVS Prime Tower measures 203 × 914 × 274 mm (8 × 36 × 10.8 in, width × height × depth) and weighs 18.2 kg (40.1 lb).

References

Brand names are trademarks of their owners. Not affiliated with or endorsed by any manufacturer. 3D models are our approximations. Prices are manufacturer list prices (MSRP) as of the month shown. How we earn from buy links: affiliate disclosure.