Will the RX-V6A damage the Ultra Evolution Elevation?

No. The RX-V6A is rated for the Ultra Evolution Elevation's 6 Ω load as it comes.

What impedance setting should I use for the Ultra Evolution Elevation on the RX-V6A?

None: the Ultra Evolution Elevation is 6 Ω, and the RX-V6A needs no change for it.

Is the RX-V6A powerful enough for the Ultra Evolution Elevation?

More than you need. From a seat 2 m away, loud 95 dB movie peaks take about 26 W per speaker, and the RX-V6A is rated 100 W per channel. Cinema reference level, 105 dB peaks, takes about 253 W.

Does the SVS Ultra Evolution Elevation work with the Yamaha RX-V6A?

Verdict

Yes

The Ultra Evolution Elevation is 6 Ω, and the RX-V6A is rated for speakers down to 4 Ω, so it drives them as is.

Speaker load

6 Ω speaker, rated down to 4 Ω

Power

100 W

More than you need. About 26 W gives 95 dB peaks at 2 m

Height decoding

Yes

Dolby Atmos and DTS:X

How to connect them

Connect the Ultra Evolution Elevation speakers to the RX-V6A's height terminals with speaker wire.
In the RX-V6A's speaker setup, set speaker impedance to 6 Ω.
Run YPAO with its microphone at your seat.

Plan the Ultra Evolution Elevation and RX-V6A in your own room.

Draw your room in 3D, place both, and see every connection checked and how loud they play at your seat. Designing is free.

Build it in your room

The specs that decide it

SVS Ultra Evolution Elevation

Impedance: 6 Ω
Sensitivity: 87 dB (2.83 V, 1 m)
Recommended amplifier power: 20–150 W
MSRP: $900 a pair (MSRP, September 2026)

All Ultra Evolution Elevation specs and pairings

Yamaha RX-V6A

Amplifier channels: 7
Height formats: Dolby Atmos, DTS:X
Lowest speaker impedance: 4 Ω
MSRP: $800 each (MSRP, October 2025)

All RX-V6A specs and pairings

Questions about the Ultra Evolution Elevation and RX-V6A

Does the Ultra Evolution Elevation work with the RX-V6A?: Yes. The Ultra Evolution Elevation is 6 Ω, and the RX-V6A is rated for speakers down to 4 Ω, so it drives them as is.
Will the RX-V6A damage the Ultra Evolution Elevation?: No. The RX-V6A is rated for the Ultra Evolution Elevation's 6 Ω load as it comes.
What impedance setting should I use for the Ultra Evolution Elevation on the RX-V6A?: None: the Ultra Evolution Elevation is 6 Ω, and the RX-V6A needs no change for it.
Is the RX-V6A powerful enough for the Ultra Evolution Elevation?: More than you need. From a seat 2 m away, loud 95 dB movie peaks take about 26 W per speaker, and the RX-V6A is rated 100 W per channel. Cinema reference level, 105 dB peaks, takes about 253 W.

Swap one of them

SVS Ultra Evolution Elevation + Onkyo TX-NR6100Works
SVS Ultra Evolution Elevation + Denon AVR-X1800HWorks
KEF Q3 Meta + Yamaha RX-V6ANeeds a setting change
KEF Q750 + Yamaha RX-V6AWorks

References

Specs verified against the manufacturer's published data. Last checked September 15, 2026.

Brand names are trademarks of their owners. Not affiliated with or endorsed by any manufacturer. 3D models are our approximations. Prices are manufacturer list prices (MSRP) as of the month shown. How we earn from buy links: affiliate disclosure.