SVS Ultra Evolution Pinnacle

Ultra Evolution series

The SVS Ultra Evolution Pinnacle is a tower speaker with 6 Ω impedance and 88 dB sensitivity. Every receiver and amp in our catalogue can drive it.

Impedance
6 Ω
What the receiver must be rated for
Sensitivity
88 dB
Higher is louder per watt
Amplifier power
20–300 W
SVS's recommendation
Bass extension
24 Hz
How low it plays

$5,000 a pair (MSRP, September 2026)

3D model of the SVS Ultra Evolution Pinnacle

Drag to turn it. Built from the published dimensions, not a photo.

We earn a commission when you buy through these links. It never affects which products we show or recommend. Disclosure

Which receivers and amps can drive it?

What decides it is impedance: the Ultra Evolution Pinnacle is 6 Ω, and the receiver or amp has to be rated for that.

  • Works

    Receivers and amps rated for 6 Ω

    29 in our catalogue

All 29 receivers and amps we checked

Works29

Which center speaker matches it?

For the closest tonal match as voices move across the front, pick a center from the same Ultra Evolution series.

Plan your room around the Ultra Evolution Pinnacle.

Draw your room in 3D, place the Ultra Evolution Pinnacle and see how they sound at your seat, with every connection to your receiver checked. Designing is free.

Build it in your room

Ultra Evolution Pinnacle specifications

Impedance
6 Ω
Sensitivity
88 dB (2.83 V, 1 m)
Low end
24 Hz
Drivers
1 × 25 mm, 2 × 133 mm, 4 × 203 mm
Size
12×50×18 in
Recommended amplifier power
20–300 W
Weight
43.9 kg (96.8 lb)
MSRP
$5,000 a pair (MSRP, September 2026)

Every value comes from the sources under References, last retrieved September 16, 2026. To check it against the rest of your system, use the compatibility checker.

Questions about the Ultra Evolution Pinnacle

What receiver do I need for the Ultra Evolution Pinnacle?
One rated for 6 Ω speakers. In our catalogue, Denon AVR-S570BT, Emotiva BasX A-700 and Yamaha RX500A are rated to drive it.
Is the Ultra Evolution Pinnacle 4 ohm or 8 ohm?
The SVS Ultra Evolution Pinnacle has a nominal impedance of 6 Ω, between the two. Use a receiver or amplifier rated down to 6 Ω or lower.
How much power does the Ultra Evolution Pinnacle need?
SVS recommends an amplifier of 20–300 W. Its sensitivity is 88 dB (2.83 V, 1 m). How much of that you use depends on how far you sit and how loud you listen, which the 3D editor works out for your room.
How low does the Ultra Evolution Pinnacle go?
The SVS Ultra Evolution Pinnacle is rated down to 24 Hz. Below that, a subwoofer takes over; where the bass actually lands depends on your room's modes.
How big is the Ultra Evolution Pinnacle?
The SVS Ultra Evolution Pinnacle measures 300 × 1275 × 461 mm (11.8 × 50.2 × 18.1 in, width × height × depth) and weighs 43.9 kg (96.8 lb).

Similar products

References

  1. SVS Ultra Evolution Pinnacle: Owner's manual, avstyle.nl, retrieved September 15, 2026
  2. SVS Ultra Evolution Pinnacle: Independent measurement, ecoustics.com, retrieved September 15, 2026
  3. SVS Ultra Evolution Pinnacle: Independent measurement, hometheaterhifi.com, retrieved September 16, 2026

Brand names are trademarks of their owners. Not affiliated with or endorsed by any manufacturer. 3D models are our approximations. Prices are manufacturer list prices (MSRP) as of the month shown. How we earn from buy links: affiliate disclosure.