Start

Dayton Audio SUB-1200

Discontinued

The Dayton Audio SUB-1200 is a powered subwoofer with a 80 W amplifier and a 12-inch driver, rated down to 25 Hz. It connects to all 26 receivers and processors in our catalogue.

Amplifier
80 W
Continuous power
Driver
12 in
One driver
Bass extension
25 Hz
Lowest rated frequency

$200 each (MSRP, August 2026)

Check it with your receiverSee it in your room
3D model of the Dayton Audio SUB-1200

Drag to turn it. Built from the published dimensions, not a photo.

We earn a commission when you buy through these links. It never affects which products we show or recommend. Disclosure

Used on eBay

Which receivers connect to it?

It takes a line-level input, so any receiver or processor with a subwoofer output can feed it.

  • Connects

    Receivers and processors with a subwoofer output

    26 in our catalogue

In its price range

All 26 receivers and processors we checked

Connects26

Plan your room around the SUB-1200.

Draw your room in 3D, place the SUB-1200 and see where its bass lands at your seat before you buy. Designing is free.

Build it in your room

SUB-1200 specifications

Amplifier
80 W
Drivers
1 × 305 mm
Low end
25 Hz
Inputs
Line, speaker-level
Size
16×17×18 in
Weight
20 kg (44.1 lb)
MSRP
$200 each (MSRP, August 2026)

Every value comes from the sources under References, last retrieved September 15, 2026. To check it against the rest of your system, use the compatibility checker.

Questions about the SUB-1200

What receiver works with the SUB-1200?
Any receiver or processor with a subwoofer output, or an amplifier with speaker outputs through its speaker-level inputs. In our catalogue that includes Denon AVR-S570BT, Yamaha RX500A and Denon AVR-S670H.
How powerful is the SUB-1200?
The Dayton Audio SUB-1200 has a 80 W continuous amplifier.
How low does the SUB-1200 go?
The Dayton Audio SUB-1200 is rated down to 25 Hz. In a room, modes can lift or cancel bass by more than 10 dB, so placement matters as much as the rating.
Does the SUB-1200 have speaker-level inputs?
Yes. It has speaker-level inputs as well as a line-level input.
How big is the SUB-1200?
The Dayton Audio SUB-1200 measures 411 × 425 × 451 mm (16.2 × 16.7 × 17.8 in, width × height × depth) and weighs 20 kg (44.1 lb).

Similar products

References

  1. Dayton Audio SUB-1200: Owner's manual, parts-express.com, retrieved September 15, 2026
  2. Dayton Audio SUB-1200: Manufacturer product page, web.archive.org, retrieved September 15, 2026

Brand names are trademarks of their owners. Not affiliated with or endorsed by any manufacturer. 3D models are our approximations. Prices are manufacturer list prices (MSRP) as of the month shown. How we earn from buy links: affiliate disclosure.