Start

Polk PSW10

The Polk PSW10 is a powered subwoofer with a 50 W amplifier and a 10-inch driver, rated down to 40 Hz. It connects to all 26 receivers and processors in our catalogue.

Amplifier
50 W
Continuous power
Driver
10 in
One driver
Bass extension
40 Hz
Lowest rated frequency

$249 each (MSRP, September 2026)

Check it with your receiverSee it in your room
3D model of the Polk PSW10

Drag to turn it. Built from the published dimensions, not a photo.

We earn a commission when you buy through these links. It never affects which products we show or recommend. Disclosure

Used on eBay

Which receivers connect to it?

It takes a line-level input, so any receiver or processor with a subwoofer output can feed it.

  • Connects

    Receivers and processors with a subwoofer output

    26 in our catalogue

In its price range

All 26 receivers and processors we checked

Connects26

Plan your room around the PSW10.

Draw your room in 3D, place the PSW10 and see where its bass lands at your seat before you buy. Designing is free.

Build it in your room

PSW10 specifications

Amplifier
50 W
Drivers
1 × 254 mm
Low end
40 Hz
Inputs
Line, speaker-level
Size
14×14×16 in
Weight
11.79 kg (26 lb)
MSRP
$249 each (MSRP, September 2026)

Every value comes from the sources under References, last retrieved September 15, 2026. To check it against the rest of your system, use the compatibility checker.

Questions about the PSW10

What receiver works with the PSW10?
Any receiver or processor with a subwoofer output, or an amplifier with speaker outputs through its speaker-level inputs. In our catalogue that includes Denon AVR-S570BT, Yamaha RX500A and Denon AVR-S670H.
How powerful is the PSW10?
The Polk PSW10 has a 50 W continuous amplifier.
How low does the PSW10 go?
The Polk PSW10 is rated down to 40 Hz. In a room, modes can lift or cancel bass by more than 10 dB, so placement matters as much as the rating.
Does the PSW10 have speaker-level inputs?
Yes. It has speaker-level inputs as well as a line-level input.
How big is the PSW10?
The Polk PSW10 measures 356 × 365 × 410 mm (14 × 14.4 × 16.1 in, width × height × depth) and weighs 11.79 kg (26 lb).

Similar products

References

  1. Polk PSW10: Manufacturer product page, polkaudio.com, retrieved September 15, 2026
  2. Polk PSW10: Owner's manual, manualslib.com, retrieved September 15, 2026

Brand names are trademarks of their owners. Not affiliated with or endorsed by any manufacturer. 3D models are our approximations. Prices are manufacturer list prices (MSRP) as of the month shown. How we earn from buy links: affiliate disclosure.