Will the AVR-S970H damage the Bronze 50 7G?

No. The AVR-S970H is rated for the Bronze 50 7G's 8 Ω load as it comes.

What impedance setting should I use for the Bronze 50 7G on the AVR-S970H?

None: the Bronze 50 7G is 8 Ω, and the AVR-S970H needs no change for it.

Is the AVR-S970H powerful enough for the Bronze 50 7G?

Comfortable. From a seat 2 m away, loud 95 dB movie peaks take about 32 W per speaker, and the AVR-S970H is rated 90 W per channel. Cinema reference level, 105 dB peaks, takes about 318 W.

Does the Monitor Audio Bronze 50 7G work with the Denon AVR-S970H?

Verdict

Yes

The Bronze 50 7G is 8 Ω, and the AVR-S970H is rated for speakers down to 4 Ω, so it drives them as is.

Speaker load

8 Ω speaker, rated down to 4 Ω

Power

90 W

Comfortable. About 32 W gives 95 dB peaks at 2 m

How to connect them

Connect the Bronze 50 7G speakers to the AVR-S970H's front terminals with speaker wire.
Run Audyssey MultEQ with its microphone at your seat.

Plan the Bronze 50 7G and AVR-S970H in your own room.

Draw your room in 3D, place both, and see every connection checked and how loud they play at your seat. Designing is free.

Build it in your room

The specs that decide it

Monitor Audio Bronze 50 7G

Impedance: 8 Ω
Sensitivity: 86 dB (2.83 V, 1 m)
Recommended amplifier power: 30–100 W
MSRP: $849 a pair (MSRP, September 2026)

All Bronze 50 7G specs and pairings

Denon AVR-S970H

Amplifier channels: 7
Height formats: Dolby Atmos, DTS:X
Lowest speaker impedance: 4 Ω
MSRP: $949 each (MSRP, September 2026)

All AVR-S970H specs and pairings

Questions about the Bronze 50 7G and AVR-S970H

Does the Bronze 50 7G work with the AVR-S970H?: Yes. The Bronze 50 7G is 8 Ω, and the AVR-S970H is rated for speakers down to 4 Ω, so it drives them as is.
Will the AVR-S970H damage the Bronze 50 7G?: No. The AVR-S970H is rated for the Bronze 50 7G's 8 Ω load as it comes.
What impedance setting should I use for the Bronze 50 7G on the AVR-S970H?: None: the Bronze 50 7G is 8 Ω, and the AVR-S970H needs no change for it.
Is the AVR-S970H powerful enough for the Bronze 50 7G?: Comfortable. From a seat 2 m away, loud 95 dB movie peaks take about 32 W per speaker, and the AVR-S970H is rated 90 W per channel. Cinema reference level, 105 dB peaks, takes about 318 W.

Swap one of them

Monitor Audio Bronze 50 7G + Onkyo TX-RZ30Works
Monitor Audio Bronze 50 7G + Denon AVR-X1800HWorks
Klipsch RP-502S II + Denon AVR-S970HWorks
KEF Q3 Meta + Denon AVR-S970HNeeds a setting change

References

Specs verified against the manufacturer's published data. Last checked September 15, 2026.

Brand names are trademarks of their owners. Not affiliated with or endorsed by any manufacturer. 3D models are our approximations. Prices are manufacturer list prices (MSRP) as of the month shown. How we earn from buy links: affiliate disclosure.