Will the RX-V6A damage the Bronze 50 7G?

No. The RX-V6A is rated for the Bronze 50 7G's 8 Ω load as it comes.

What impedance setting should I use for the Bronze 50 7G on the RX-V6A?

None: the Bronze 50 7G is 8 Ω, and the RX-V6A needs no change for it.

Is the RX-V6A powerful enough for the Bronze 50 7G?

More than you need. From a seat 2 m away, loud 95 dB movie peaks take about 32 W per speaker, and the RX-V6A is rated 100 W per channel. Cinema reference level, 105 dB peaks, takes about 318 W.

Does the Monitor Audio Bronze 50 7G work with the Yamaha RX-V6A?

Verdict

Yes

The Bronze 50 7G is 8 Ω, and the RX-V6A is rated for speakers down to 4 Ω, so it drives them as is.

Speaker load

8 Ω speaker, rated down to 4 Ω

Power

100 W

More than you need. About 32 W gives 95 dB peaks at 2 m

How to connect them

Connect the Bronze 50 7G speakers to the RX-V6A's front terminals with speaker wire.
Run YPAO with its microphone at your seat.

Plan the Bronze 50 7G and RX-V6A in your own room.

Draw your room in 3D, place both, and see every connection checked and how loud they play at your seat. Designing is free.

Build it in your room

The specs that decide it

Monitor Audio Bronze 50 7G

Impedance: 8 Ω
Sensitivity: 86 dB (2.83 V, 1 m)
Recommended amplifier power: 30–100 W
MSRP: $849 a pair (MSRP, September 2026)

All Bronze 50 7G specs and pairings

Yamaha RX-V6A

Amplifier channels: 7
Height formats: Dolby Atmos, DTS:X
Lowest speaker impedance: 4 Ω
MSRP: $800 each (MSRP, October 2025)

All RX-V6A specs and pairings

Questions about the Bronze 50 7G and RX-V6A

Does the Bronze 50 7G work with the RX-V6A?: Yes. The Bronze 50 7G is 8 Ω, and the RX-V6A is rated for speakers down to 4 Ω, so it drives them as is.
Will the RX-V6A damage the Bronze 50 7G?: No. The RX-V6A is rated for the Bronze 50 7G's 8 Ω load as it comes.
What impedance setting should I use for the Bronze 50 7G on the RX-V6A?: None: the Bronze 50 7G is 8 Ω, and the RX-V6A needs no change for it.
Is the RX-V6A powerful enough for the Bronze 50 7G?: More than you need. From a seat 2 m away, loud 95 dB movie peaks take about 32 W per speaker, and the RX-V6A is rated 100 W per channel. Cinema reference level, 105 dB peaks, takes about 318 W.

Swap one of them

Monitor Audio Bronze 50 7G + Onkyo TX-NR6100Works
Monitor Audio Bronze 50 7G + Denon AVR-X1800HWorks
Klipsch RP-502S II + Yamaha RX-V6AWorks
KEF Q3 Meta + Yamaha RX-V6ANeeds a setting change

References

Specs verified against the manufacturer's published data. Last checked September 15, 2026.

Brand names are trademarks of their owners. Not affiliated with or endorsed by any manufacturer. 3D models are our approximations. Prices are manufacturer list prices (MSRP) as of the month shown. How we earn from buy links: affiliate disclosure.