Start

Pioneer SP-FS52

Discontinued

The Pioneer SP-FS52 is a tower speaker with 6 Ω impedance and 87 dB sensitivity. Every receiver and amp in our catalogue can drive it.

Impedance
6 Ω
What the receiver must be rated for
Sensitivity
87 dB
Higher is louder per watt
Bass extension
40 Hz
How low it plays
Driver
5.2 in
Nominal size

$130 each (MSRP, September 2026)

Check it with your receiverSee it in your room
3D model of the Pioneer SP-FS52

Drag to turn it. Built from the published dimensions, not a photo.

We earn a commission when you buy through these links. It never affects which products we show or recommend. Disclosure

Used on eBay

Which receivers and amps can drive it?

What decides it is impedance: the SP-FS52 is 6 Ω, and the receiver or amp has to be rated for that.

  • Works

    Receivers and amps rated for 6 Ω

    29 in our catalogue

In its price range

All 29 receivers and amps we checked

Works29

Which center speaker matches it?

No center in our catalogue is from the Pioneer range yet. Any center plays; one from the same series is the closest tonal match.

Plan your room around the SP-FS52.

Draw your room in 3D, place the SP-FS52 and see how they sound at your seat, with every connection to your receiver checked. Designing is free.

Build it in your room

SP-FS52 specifications

Impedance
6 Ω
Sensitivity
87 dB (2.83 V, 1 m)
Low end
40 Hz
Drivers
1 × 25 mm, 1 × 133 mm, 2 × 133 mm
Size
9×35×11 in
Weight
11.71 kg (25.8 lb)
MSRP
$130 each (MSRP, September 2026)

Every value comes from the sources under References, last retrieved September 15, 2026. To check it against the rest of your system, use the compatibility checker.

Questions about the SP-FS52

What receiver do I need for the SP-FS52?
One rated for 6 Ω speakers. In our catalogue, Denon AVR-S570BT, Emotiva BasX A-700 and Yamaha RX500A are rated to drive it.
Is the SP-FS52 4 ohm or 8 ohm?
The Pioneer SP-FS52 has a nominal impedance of 6 Ω, between the two. Use a receiver or amplifier rated down to 6 Ω or lower.
How much power does the SP-FS52 need?
Pioneer does not publish a recommended amplifier power. Its sensitivity is 87 dB (2.83 V, 1 m). How much of that you use depends on how far you sit and how loud you listen, which the 3D editor works out for your room.
How low does the SP-FS52 go?
The Pioneer SP-FS52 is rated down to 40 Hz. Below that, a subwoofer takes over; where the bass actually lands depends on your room's modes.
How big is the SP-FS52?
The Pioneer SP-FS52 measures 225 × 894 × 270 mm (8.9 × 35.2 × 10.6 in, width × height × depth) and weighs 11.71 kg (25.8 lb).

Similar products

References

  1. Pioneer SP-FS52: Spec sheet, parts-express.com, retrieved September 15, 2026
  2. Pioneer SP-FS52: Independent measurement, audioholics.com, retrieved September 15, 2026
  3. Pioneer SP-FS52: Independent measurement, hometechnologyreview.com, retrieved September 15, 2026

Brand names are trademarks of their owners. Not affiliated with or endorsed by any manufacturer. 3D models are our approximations. Prices are manufacturer list prices (MSRP) as of the month shown. How we earn from buy links: affiliate disclosure.