Does the Signature Elite ES90 work with the RX500A?

Yes, with one setting change. The Signature Elite ES90 is 4 Ω: set the receiver to 4 Ω in its speaker setup.

Will the RX500A damage the Signature Elite ES90?

Not once it is set up for it: the RX500A is rated for a 4 Ω speaker with its speaker impedance set to 4 Ω.

Is the RX500A powerful enough for the Signature Elite ES90?

Comfortable. From a seat 2 m away, loud 95 dB movie peaks take about 41 W per speaker, and the RX500A is rated 70 W per channel. Cinema reference level, 105 dB peaks, takes about 401 W.

Does the Polk Signature Elite ES90 work with the Yamaha RX500A?

Verdict

Yes, set it to 4 Ω

The Signature Elite ES90 is 4 Ω: set the receiver to 4 Ω in its speaker setup.

Speaker load

Set 4 Ω

4 Ω speaker, change it in speaker setup

Power

70 W

Comfortable. About 41 W gives 95 dB peaks at 2 m

Height decoding

Yes

Dolby Atmos and DTS:X

How to connect them

Connect the Signature Elite ES90 speakers to the RX500A's height terminals with speaker wire.
In the RX500A's speaker setup, set speaker impedance to -Infinity Ω.
Run Room Correction with its microphone at your seat.

Plan the Signature Elite ES90 and RX500A in your own room.

Draw your room in 3D, place both, and see every connection checked and how loud they play at your seat. Designing is free.

Build it in your room

The specs that decide it

Polk Signature Elite ES90

Impedance: 4 Ω
Sensitivity: 85 dB
Recommended amplifier power: 20–150 W
MSRP: $449 a pair (MSRP, September 2026)

All Signature Elite ES90 specs and pairings

Yamaha RX500A

Amplifier channels: 7
Height formats: Dolby Atmos, DTS:X
Lowest speaker impedance: 4 Ω
MSRP: $600 each (MSRP, May 2026)

All RX500A specs and pairings

Questions about the Signature Elite ES90 and RX500A

Does the Signature Elite ES90 work with the RX500A?: Yes, with one setting change. The Signature Elite ES90 is 4 Ω: set the receiver to 4 Ω in its speaker setup.
Will the RX500A damage the Signature Elite ES90?: Not once it is set up for it: the RX500A is rated for a 4 Ω speaker with its speaker impedance set to 4 Ω.
What impedance setting should I use for the Signature Elite ES90 on the RX500A?: 4 Ω. Set the receiver to 4 Ω in its speaker setup.
Is the RX500A powerful enough for the Signature Elite ES90?: Comfortable. From a seat 2 m away, loud 95 dB movie peaks take about 41 W per speaker, and the RX500A is rated 70 W per channel. Cinema reference level, 105 dB peaks, takes about 401 W.

Swap one of them

Polk Signature Elite ES90 + Denon AVR-S670HNot recommended
Polk Signature Elite ES90 + Denon AVR-X1700HNeeds a setting change
JBL Stage 250B + Yamaha RX500AWorks
Klipsch R-50M + Yamaha RX500AWorks

References

Specs verified against the manufacturer's published data. Last checked September 15, 2026.

Brand names are trademarks of their owners. Not affiliated with or endorsed by any manufacturer. 3D models are our approximations. Prices are manufacturer list prices (MSRP) as of the month shown. How we earn from buy links: affiliate disclosure.