Will the RX-V6A damage the Prime Tower?

No. The RX-V6A is rated for the Prime Tower's 8 Ω load as it comes.

What impedance setting should I use for the Prime Tower on the RX-V6A?

None: the Prime Tower is 8 Ω, and the RX-V6A needs no change for it.

Is the RX-V6A powerful enough for the Prime Tower?

More than you need. From a seat 2 m away, loud 95 dB movie peaks take about 26 W per speaker, and the RX-V6A is rated 100 W per channel. Cinema reference level, 105 dB peaks, takes about 253 W.

Does the SVS Prime Tower work with the Yamaha RX-V6A?

Verdict

Yes

The Prime Tower is 8 Ω, and the RX-V6A is rated for speakers down to 4 Ω, so it drives them as is.

Speaker load

8 Ω speaker, rated down to 4 Ω

Power

100 W

More than you need. About 26 W gives 95 dB peaks at 2 m

How to connect them

Connect the Prime Tower speakers to the RX-V6A's front terminals with speaker wire.
Run YPAO with its microphone at your seat.

Plan the Prime Tower and RX-V6A in your own room.

Draw your room in 3D, place both, and see every connection checked and how loud they play at your seat. Designing is free.

Build it in your room

The specs that decide it

SVS Prime Tower

Impedance: 8 Ω
Sensitivity: 87 dB (2.83 V, 1 m)
Recommended amplifier power: 20–250 W
MSRP: $700 each (MSRP, September 2026)

All Prime Tower specs and pairings

Yamaha RX-V6A

Amplifier channels: 7
Height formats: Dolby Atmos, DTS:X
Lowest speaker impedance: 4 Ω
MSRP: $800 each (MSRP, October 2025)

All RX-V6A specs and pairings

Questions about the Prime Tower and RX-V6A

Does the Prime Tower work with the RX-V6A?: Yes. The Prime Tower is 8 Ω, and the RX-V6A is rated for speakers down to 4 Ω, so it drives them as is.
Will the RX-V6A damage the Prime Tower?: No. The RX-V6A is rated for the Prime Tower's 8 Ω load as it comes.
What impedance setting should I use for the Prime Tower on the RX-V6A?: None: the Prime Tower is 8 Ω, and the RX-V6A needs no change for it.
Is the RX-V6A powerful enough for the Prime Tower?: More than you need. From a seat 2 m away, loud 95 dB movie peaks take about 26 W per speaker, and the RX-V6A is rated 100 W per channel. Cinema reference level, 105 dB peaks, takes about 253 W.

Swap one of them

References

Specs verified against the manufacturer's published data. Last checked September 15, 2026.

Brand names are trademarks of their owners. Not affiliated with or endorsed by any manufacturer. 3D models are our approximations. Prices are manufacturer list prices (MSRP) as of the month shown. How we earn from buy links: affiliate disclosure.